A Little Hack on FlexTee Stand

Sometime the load on the Universal stand or a Flextee Stand can be too heavy and the extended vertical poles can slide down under the weight of the blankets.

Usually all that you need to do is to tighten the knob a little more and it will be enough.

But there is a little trick that you can do, if you do not want
to over tighten the knob and have the larger weight on the
stand.

1. Raise the pole to the desired height.
2. Mark the spot.
3. Then raise the pole an inch or two higher.
4. Wrap several layers of electric tape around the pole at
the desired height.

Now even if the knob is not tightened up all the way – the pole will not slide down.