The NEW 2019 SPB63 model blocks more sound than ever, with an improved sound absorbing layer to make your recordings sound crisp and clear. The booth is able to comfortably fit two people with their equipment, for practicing singing, musical instruments, voice over recordings, audiometry testing, and much more! The Sound Isolation Booth, SPB63 measures approximately 80 inches tall x 40 inches wide x 80 inches long and can be transported in a passenger car with an assembly time of 30-60 minutes!
In Europe, you can buy soundproofing Vocal Booth SPB-63-1 here: VocalBoothToGo.EU
Soundproof panels and sound absorption panels can be rolled up and stored in the provided transport bags.
Light weight aluminum frame is easy to assemble and disassemble without the need for any tools or screws etc. All poles are of the same size to make assembly easy. Frame can fit in the same bags with the panels.
(1) Included LED light bar provides sufficient illumination and no noise or extra heat.
Booth has a door panel with a Zipper closure and a Vinyl window. Internal sound absorbing panels do not have a window built-in to reduce the number of reflective surfaces.
This vocal booth is intuitive to set-up and easy to take down and transport. When the booth is disassembled and packed into three bags the weight can be distributed evenly with the weight per bag of approximately 130 lbs. Full bag size is approximately 42 inches long x 16 inches wide and tall.
The bags are specially designed with additional secure straps inside and a strong zipper to keep sound panels together. Since the bags are designed to hold considerable weight, we also provided 4 handles, so two people can carry it.
The SPB63 is large enough for two artists to fit comfortably with guitars, wind instruments, or for a small drum set.
Internal sound absorbing panels create a great acoustic environment for audio recording. Outer Soundproof panels reduce the sound by a whopping 32 dB at midrange and even more, up to 45dB at high frequency sound.
Soundproofing walls are made out of specially constructed multilayered soundproof panels containing Limp Mass Membrane (STC 33). In assembled state outer sound proof walls are joined together with Special corner panels with Velcro. This SPB63 design has a flat roof, to comfortably fit into an apartment with average ceiling height.
( NOTE: Limp Mass property of the wall panels increase soundproofing capacity compare to the material of the same weight but in rigid form).
Sound absorption panels are made out of Producer’s Choice for superior booth acoustics (NRC 0.8, or 80% noise reduction).
- Assembled Size: 80 inches long x 40 inches wide x 80 inches high
- Soundproofing Walls STC 33
- Sound Absorbing panels NRC -0.8
- Total Weight ~ 400 lbs.
- Frame Aluminum. Connectors steel.
- 3 Black Carry/Storage Bags
- 1 LED Light Bar
- 4 1-Inch Thick Decoupling Foam Floor Mats
Assembly. The booth features a lightweight aluminum frame. The frame itself is easy to assemble, but with the addition of the swing door feature, the assembly of the door frame part got a little complicated. We recommend checking the hardware on the booths prior to assembly. Sometimes the nuts can be loose during transit and this may complicate the assembly. Please tighten up all the nuts and screws before putting the booth together.
WE STRONGLY RECOMMEND TO FOLLOW INSTRUCTIONS. (Not following assembly instructions will result in unnecessary waste of time and frustration.)
There are no reviews yet.